SCT livelink Fummins data logging
- Download and install Livelink https://derivepower.freshdesk.com/support/solutions/articles/72000599992-device-updater
- Open Livelink and select “I want to datalog a vehicle”
- Follow the prompts to connect, and have your device hooked to the truck and computer.
- Once communications are complete, skip selecting pids and “load config”
- Pids will look like this
- Start recording a log (max 5 mins)
- Stop the log
- Save the log using “save all”
- Email for review.
If you wish to log stand alone after step 5 export DLF/DLX which will load the logger on your device. Be aware you must select the logger each time before logging when doing stand alone. 
correct pids will look like this or similar, 6.4 tcm shown below
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article