Flashing and logging with TDN
- Please download TDN from the app store and use code SNMN-7576 to link to us.
- It is a good idea to resunc on a pc first and have the newest firmware.
- Follow the setup in the app to pair the MPVI/RTD to your phone; you should resync on a pc beforehand to update firmware.
- Read the ECU if you have two; reads to do each one, and then it will upload and send the reads to me.
- If you have an ECU that is locked or will not read do this, open the data logger and start it. Once it is running and stops after 5s, back to the main data logger screen and "view sync"; the new log will be there, tap upload, then sync. This will add the vehicle into TDN.
- Reply back here
- To run a data log once tuned
- Datalog
- view sync
- tap the config i have sent for the appropriate controller
- sync files
- start the logger
- stop once done
- view sync
- tap upload
- reply here
Full TDN info https://support.hptuners.com/support/search?term=tdn
TDN Data logging
- go to data logging
- tap view files
- select correct scanner config
- sync files
- start data logger
- drive
- stop logger
- view files
- tap new log
- upload
- sync
- reply to ticket with feedback
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article