Using Switch on the Fly (Cruise Control Method)

Step 1: Meet Switching Requirements

• Vehicle must be equipped with OEM cruise control hardware and steering wheel.

• Vehicle must be On or Running, and Cruise Control must be deactivated.

Step 2: Activate the Switching Menu

• Press the CANCEL (X) button.

• Active Slot displayed via ETC Lamp Blink/Chime. (no blink = oem slot)

Once activated, or when a slot is changed, map switching is available for 10 seconds.

Step 3: Now That We Are Activated

• Press the RESUME button to increase Active Slot by 1.

• Press the SET (-) button to decrease Active Slot by 1.

• Active Slot displayed via ETC Lamp Blink/Chime.

Active Slot will be limited to the Max Allowed Slots calibration setting.

Step 4: Deactivate the Switching Menu

The switching menu will automatically deactivate after 10 seconds if no buttons are pressed.

• Press the CANCEL (X) button (Display Active) to deactivate switching menus.

• Press the CANCEL (X) button (Display Inactive) to display Active Slot via ETC Lamp Blink/Chime.